Our reports focused on the need for introducing mandatory radio regulations. And, really, accustomed to long offline and telephone conversations, we forgot (and did not know) all the rules of radio communication. On the one hand, this is good – the enemy listening to the broadcast will not only not understand, but, on our instructions, will self-destruct its team. On the other hand, following the same instructions, the broadcasting team itself can at least get lost, divide, and violate the original plan. We will try to put everything in its place.
- So, for a start, the main erroneous points on the use of radio communications in battle.
- do not present on the air
- talking off topic (not important combat information) and just talking a lot
only the team commander and the fire group commanders should speak, snipers and tactically important fighters can still communicate with each other, such as a demolition man or machine gunner, they may have a direct connection with the commander, since they only get the task from him (although we each most important). From 1 Pure Radio Network you can now get the best details available now.
Modes Of Operation
The main modes of operation of radio stations:
- Work at the reception – the radio station “listens” broadcast
- Work on the transfer – the radio station broadcasts
It should be noted that the radio in two modes at the same time can not work. Either you speak or listen. This is not your phone. Hence the problems that arise when talking with a large number of people on the air but before proceeding to a detailed acquaintance with the rules for the use of radio communications, let us give a little more theory.
Bands, Frequencies And Channels
Speaking of radio, you can expand the whole section. But we are limited to one article, so we will try to capture everything at once in one place in a brief and understandable presentation.
All manufactured radios can be classified according to the frequency ranges they use. Those.in general, not all radios can come into contact with each other, it depends on their range. In practice, hardball and airsoft among civilian bands are the main PMR and LPD.
Within the limits of a range the standard allocates the channels anchored to certain frequencies. We will not go deep into physics, we will only dwell on the facts, subchannels can be superimposed on the channel, and all this can be subjected to encryption and other problems from above. One thing is to be learned from this – in order for the radio stations to communicate with each other, they need to be tuned to one channel / sub-channel / mode, etc. Le marcatrici laser per metalli servono a marcare e incidere ciò che si desidera in modo accurato e preciso, motivo per cui sono utilizzate in diversi settori come quelli meccanici, medicinali, elettronici e altri ancora. https://www.lasit.it/marcatura-laser-metalli/
Typical channel selection
And what have we come to? Before the commencement of combat operations, it is necessary to regulate each significant object (team, headquarters) with its own channel. At the same time within the facility can be used and its own communication system between specific units (soldiers). Stopping again on hardball, knowledge of enemy frequencies can also be known, if necessary, for example, to comply with the prohibition of wiretapping the enemy. Otherwise, the communication ranges may coincide.